Zhangjiagang Beisu Machinery Co., Ltd.

 

Challenge is opportunity, breakthrough is growth.

Home ProductsPlastic Extrusion Machine

Conical PVC Plastic Extrusion Machine Doube Screw Design

Certification
China Zhangjiagang Beisu Machinery Co., Ltd. certification
China Zhangjiagang Beisu Machinery Co., Ltd. certification
The quality of the machine of Beisu Machinery is very stable, the output is high, the details are very user friendly, and they provide a quick response when we need service.

—— Ahmed Zeitoun

The quality of the high speed mixer produced by Beisu Machinery is outstanding. We have ordered 3 sets of equipment and they are all in use. Maria provides our professional and prompt after sales service.

—— Adrew

I'm Online Chat Now

Conical PVC Plastic Extrusion Machine Doube Screw Design

Conical PVC Plastic Extrusion Machine Doube Screw Design
Conical PVC Plastic Extrusion Machine Doube Screw Design Conical PVC Plastic Extrusion Machine Doube Screw Design Conical PVC Plastic Extrusion Machine Doube Screw Design Conical PVC Plastic Extrusion Machine Doube Screw Design Conical PVC Plastic Extrusion Machine Doube Screw Design

Large Image :  Conical PVC Plastic Extrusion Machine Doube Screw Design

Product Details:
Place of Origin: China
Brand Name: BEISU
Certification: CE
Model Number: SJSZ65/132
Payment & Shipping Terms:
Minimum Order Quantity: 1 SET
Price: Negotiable
Packaging Details: Plastic films with wood tray
Delivery Time: 40 DAYS
Payment Terms: L/C, T/T
Supply Ability: 50 SET PER YEAR
Detailed Product Description
PLC Brand: SIEMENS Feeding: Twin Screw Force Feeding
Screw Model: Doube Screw Weight: 5000kg
Application: PVC Sheet Condition: New
Raw Material: PVC Powder,Caco3 Product Type: PVC Pipe
Pipe Range: 16-63mm
High Light:

plastic extrusion equipment

,

plastic extruder

Conical PVC Twin Screw PVC extruder machine for make electric conduits

 

1 Structural principles

For the basic mechanism of the extrusion process, simply a screw rotates in the barrel and pushes the plastic forward. The screw structure is a bevel or a slope wound around the center layer for the purpose of increasing the pressure to overcome the greater resistance. As far as the extruder is concerned, there are three kinds of resistances to be overcome during operation: one is the frictional force, which contains the friction between the solid particles (feed) and the wall of the cylinder and the number of turns before the screw is rotated (feeding zone) between them. There are two kinds of frictional forces; the second is the adhesion of the melt on the wall; the third is the internal flow resistance of the melt when it is pushed forward.

 

According to Newton's theorem, if an object is stationary in a certain direction, then the object is in equilibrium with the force balance in this direction. For a circumferentially moving screw, it has no axial movement, that is to say the axial force on the screw is in equilibrium. So if the screw exerts a large forward thrust on the plastic melt, it also applies a similarly sized but backward thrust to the other object. Obviously, the thrust it exerts is on the thrust bearing behind the feed port. Most single-screws are right-handed, and if viewed from the back, they are counter-rotating, and they are rotated back out of the barrel by a rotary motion. In some twin-screw extruders, the two screws rotate in opposite directions in the two cylinders and cross each other, so they must be a right-handed, one-left, and the two screws are the same for the occlusal twin-screw. The direction of rotation is such that it must have the same orientation. However, in either case, the thrust bearing that bears the backward force still conforms to Newton's theorem.

 

2 Temperature principle

 

The extrudable plastics are thermoplastics that melt upon heating and solidify again upon cooling. Therefore, heat is required during the extrusion process to allow the plastic to reach the melting temperature. So where does the heat of the molten plastic come from? First, the weighbridge feed preheating and the barrel/die heater may work and it is very important at start-up, in addition the motor inputs energy, ie the resistance of the motor against the viscous melt The frictional heat generated in the barrel when turning the screw is also an important source of heat for all plastics, except for small systems, low speed screws, high melt temperature plastics and extrusion coating applications. In operation, it is important to realize that the barrel heater is not the main source of heat, and its effect on extrusion is less than we expected. The post-cylinder temperature is important because it affects the rate of solids transport in the teeth or in the feed. In general, in addition to being used for a specific purpose (such as light, fluid distribution or pressure control), the die and mold temperatures should reach or be close to the desired temperature of the melt.

 

3 Deceleration principle

 

In most extruders, the change in screw speed is achieved by adjusting the speed of the motor, which typically rotates at full speed of approximately 1750 rpm, which is too fast for an extruder screw. If it is rotated at such a fast speed, too much frictional heat will be generated, and a uniform, well-stirred melt cannot be prepared because the residence time of the plastic is too short. A typical reduction ratio should be between 10:1 and 20:1. Both the gear and the pulley can be used in the stage, but the second stage uses the gear and positions the screw in the center of the next large gear. For some slow-running machines (such as twin-screws for UPVC), there may be three deceleration phases, which may be as low as 30 rpm or lower (60:1 ratio). On the other hand, some very long twin-screws for agitation can run at 600 rpm or faster, thus requiring a very low deceleration rate and more deep cooling. If the deceleration rate is mismatched with the work, too much energy will be wasted. It may be necessary to add a pulley block between the motor and the deceleration phase that changes the large speed, either to increase the screw speed even beyond the previous limit or to reduce the large speed. This increases the available energy, reduces the current value, and avoids motor failure. In both cases, the output may increase due to the material and its cooling needs.

 

Conical PVC Plastic Extrusion Machine Doube Screw Design 0

 

Main technical parameter:

 

Model SJSZ51 SJSZ65 SJSZ80 SJSZ92 SJSZ105
Screw DIA(mm) 51/105 65/132 80/156 92/188 105/216
Qty of screw 2 2 2 2 2
Screw direction Opposite and outer
Screw speed(rpm) 1-37 1-34.7 1-36.9 1-33 1-32
Screw length(mm) 1065 1440 1800 2500 3330
Structure Conical mesh
Main motor power(kw) 22 37 55 90 185
Total power(kw) 38 58 90 140 255
Output(max: kg/h) 135 250 450 800 1400
Qty of barrel heating zone 4 4 5 5 6
Feeder Screw dosing
Center height of machine(mm) 1000 1000 1000 1100 1300

 

 

Conical PVC Plastic Extrusion Machine Doube Screw Design 1Conical PVC Plastic Extrusion Machine Doube Screw Design 2Conical PVC Plastic Extrusion Machine Doube Screw Design 3

 

Maintenance method

 

1. After 500 hours of use, there will be iron scraps or other impurities from the gears in the gearbox. Therefore, the gears should be cleaned and the gearbox oil should be replaced at the same time.

 

2. After a period of use, perform a thorough inspection of the extruder and check the tightness of all screws.

 

3. If the main power supply and heating are stopped suddenly during production, when the power supply is restored, the barrels must be reheated to the specified temperature and kept warm for a period of time before the extruder can be started.

 

4. If the steering fullness of the meter and the pointer is found, check whether the contact of the edge such as the thermocouple is good.

 

Contact Details
Zhangjiagang Beisu Machinery Co., Ltd.

Contact Person: batista

Tel: +8613913294389

Send your inquiry directly to us (0 / 3000)