Payment & Shipping Terms:
|Extruder Model:||SJ-75/33||Max. Output:||280kg/h|
|Vacuum Power:||4Kw X 2||Water Power:||5.5Kw X 2|
|Cutter Power:||2.2Kw||Warranty:||12 Months|
|Processing Type:||Extrusion Machine|
water drainge pipe production line,
plastic pipe production line
110mm~250mm HDPE drainge solid pipe production line with PLC control
Brief introduction of PE pipe production process:
The first step, raw material compounding and drying: PE pellets and water supply pipes are purchased from PE pellets, first mixed with the added masterbatch and antistatic masterbatch (gas tube) in the mixing mixer. After uniformity, the uniformly mixed material is pumped into a storage tank having a heating and drying function by a suction machine.
The second step, the plasticizer extrusion molding of the extruder: the extruder screw barrel and the molding die are electrically heated by the externally coated heating ring, and the working temperature is 160-220 °C. The material enters the extruder barrel from the storage hopper, and is conveyed, metered, plasticized, and compressed into the molding die under the conveying and shearing of the spiral rib. A small amount of mixed color strands are heated and plasticized by a small screw extruder to enter from the side of the mold. The two materials are mixed and extruded through a die.
The third step, vacuum setting cooling: the formed material passes through the sizing sleeve into the vacuum cooling box for shaping and pre-cooling, and then after two stages of cooling to cool to normal temperature and complete the shaping process.
The fourth step, printing, drawing, cutting, turning and winding: the shaped pipe is printed, and the length is measured under the traction, and the cutting machine enters the turning frame or the winding machine (for the pipe below DN50), and Cut to the set length.
The fifth step is to inspect the qualified products into the warehouse: the cut products are inspected and the qualified products enter the warehouse. The non-conforming product and the waste scrap produced during the production process are crushed and returned to the production system for reuse.
Raw material+additive→Mixer→Auto Feeder→Hopper dryer→Single screw Extruder→-Moulds→Vacuum calibration tank→Spray Cooling Tank→Haul-off Unit→Cutting Unit→Stacker
Details specification pictures of HDPE pipe production line by BEISU Machinery:
Main technical parameter:
|Max lineal speed||12||10||3.5||3||2||1.2|
Zhangjiagang Beisu Machinery has a professional and dedicated after-sales service team to provide customers with a full range of responsible and reliable service. Our customer service work is divided into three phases: pre-sales program discussion and design, production tracking and installation and commissioning, and after-sales service and maintenance.
Pre-sales program discussion and design:
According to the customer's actual crushing or processing line requirements, provide customers with the corresponding professional knowledge explanation; at the same time, our engineering team selects the equipment model for you, customizes the most reasonable and effective crushing scheme, and ensures the perfect combination of our equipment and site layout. Create the greatest value and leave you carefree.
We provide customers with the design of the production line process, and truly design a satisfactory and reasonable production line for customers. Often, in order to meet the special needs of our customers and achieve the best results, we will make non-standard design changes to our products and treat every customer with care.
Contact Person: batista