Payment & Shipping Terms:
|Extruder Model:||SJ-65/33||Max. Output:||180kg/h|
|Vacuum Power:||3Kw||Water Power:||4Kw|
|Haul Off Power:||0.75Kw||Cutter Power:||2.2Kw|
|Inverter Brand:||ABB Or Delta||Temperature Brand:||OMRON|
water drainge pipe production line,
plastic pipe production line
HDPE pipe production line for Pressure and Gas pipe
The HDPE pipe production line produced by BEISU is suitable for the following pipe production lines: PE pipe production line, MPP power pipe production line, PE water pipe production line, PE water supply pipe production line, PERT pipe production line, PPR pipe production line, porous plum tube production line, alloy bushing tube production line. , composite plastic pipe production line, PE composite pipe production line, etc.
Summary of HDPE Pipe diameter for 16~63mm
A1: Maximum Capacity: it can reach 2.5~3 ton per 24 hours depend on formula
A2: Water supply:≤25℃,≥0.3Mpa
A3: Air supply:0.3m³/min,>0.5 Mpa
A5: Humidity:95% no condensation
A6: Installation power:123kw
A7: Tatal Length:35 meters
Low-voltage electrical appliances:
A1:Button, toggle switch: France Schneider products
A2:Contactor: French Schneider products
A3:Temperature control table: Japan OMRON
A4:Heating coil: stainless steel ceramic heater
Production line conditions:
A1:Location: Factory interior
A2:Power: Safety zone with warning sign
A3:Temperature: 0-40 ° C
A4:Humidity: 85% without condensation
Raw material+additive→Mixer→Auto Feeder→Hopper dryer→Single screw Extruder→-Moulds→Vacuum calibration tank→Spray Cooling Tank→Haul-off Unit→Cutting Unit→Stacker
Production process of HDPE pipe production line produced by BEISU Machinery:
(1) HDPE raw materials and masterbatch pellets are dried and mixed into the dry mixing machine. The HDPE raw materials are uniformly mixed into the hopper through the vacuum suction machine. The vacuum suction machine produced by Benecke has drying and drying at the same time. The function.
(2) The raw materials are plasticized by a single-screw extruder and extruded, and the side SJ30 single-screw extruder extrudes the color-coded line.
(3) The HDPE pipe is extruded from the mold and then enters the vacuum sizing box for sizing and pipe cooling.
(4) After the HDPE pipe comes out of the vacuum sizing box, it enters the cooling water tank or cools the spray water tank according to the pipe diameter.
(5) After the pipe is formed, it enters the printing process of the printer.
(6) Traction into the planetary cutting machine by the crawler tractor
(7) Planetary cutting machine for HDPE pipe cutting length
(8) After the pipe cutting is completed, it will automatically slide into the stacking frame to carry out the packing process.
Details specification pictures of HDPE pipe production line by BEISU Machinery:
Main technical parameter:
|Max lineal speed||12||10||3.5||3||2||1.2|
|O.D||Average external diameter||Pipe Series|
|Dem,min||Dem,max||Nominal wall thickness|
Contact Person: batista