 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Material: | LDPE/PP/PPR/PEX | Pipe Range: | 16mm~63mm |
|---|---|---|---|
| Extruder Model: | SJ-65/33 | Max. Output: | 180kg/h |
| Max.speed: | 15m/min | Motor Power: | 37Kw |
| Vacuum Power: | 3Kw | Water Power: | 4Kw |
| Haul Off Power: | 0.75Kw | Cutter Power: | 2.2Kw |
| Temperature Brand: | OMRON | ||
| Highlight: | plastic pipe manufacturing machine,plastic pipe production line |
||
High Speed Three layer 16mm~63mm LDPE water pipe production line
Application:
The LDPE pipe production line produced by BEISU is suitable for the following pipe production lines: PE pipe production line, MPP power pipe production line, PE water pipe production line, PE water supply pipe production line, PERT pipe production line, PPR pipe production line, porous plum tube production line, alloy bushing tube production line. , composite plastic pipe production line, PE composite pipe production line, etc.
Summary of LDPE Pipe diameter for 16~63mm:
Based on the absorption of foreign advanced extruder manufacturing technology, the equipment has been improved and upgraded according to the specific needs of domestic customers. It has the advantages of low energy consumption, large output and stable operation.
The SJ-65/33 HDPE single-screw extruder uses a 33:1 aspect ratio to greatly improve the quality of plasticizing and mixing of PE materials. The extruded pipe has the characteristics of good plasticizing effect and good effect.
At the same time, the extruder can use the PLC touch screen control system such as Siemens or Delta to realize the automatic control and operation of the equipment according to customer requirements!
The specific technical parameters are as follows:
- Screw diameter: 65mm
- Length to diameter ratio: 33:1
- Screw barrel material: 38CrMoAlA, using Zhoushan famous brand products
- barrel heating and cooling: using cast aluminum heating ring, stainless steel cover, beautiful
- barrel heating power: 4.5kw / section, 5 sections heating
-Cylinder cooling: air-cooled, 0.25kw/segment, 5-stage cooling
- Screw speed: 5-90 rpm
-Motor power: 45kw, Xi'an Sima DC motor
- Host speed control: thyristor DC speed regulator
- Contactor: Schneider brand products
- Circuit breaker, open: Delixi brand products
- Intermediate relay: Schneider brand products
- Push button switch: Schneider products
- Temperature control table: Omron or RKC brand products
- With main motor overload protection alarm system
-The gearbox uses a hardened gearbox
- At the same time, it can increase the host quantitative feeding device according to the customer's specific requirements.
Layout:
Raw material+additive→Mixer→Auto Feeder→Hopper dryer→Single screw Extruder→-Moulds→Vacuum calibration tank→Spray Cooling Tank→Haul-off Unit→Cutting Unit→Stacker
Details specification pictures of HDPE pipe production line by BEISU Machinery:
Main technical parameter:
| Diameter(mm) | 20-63 | 20-110 | 75-250 | 110-315 | 160-450 | 315-450 |
| Conical extruder | SJ65 | SJ65 | SJ75 | SJ90 | SJ90 | SJ120 |
| Extruder powder(KW) | 55 | 75 | 110 | 110 | 160 | 280 |
| Max lineal speed | 12 | 10 | 3.5 | 3 | 2 | 1.2 |
| Max capacity(K/G) | 150 | 180 | 350 | 450 | 450 | 700 |
| O.D | Average external diameter | Pipe Series | ||||
| S5 | S4 | S3.2 | S2.5 | |||
| Dem,min | Dem,max | Nominal wall thickness | ||||
| 20 | 20.0 | 20.3 | 2.0 | 2.3 | 2.8 | |
| 25 | 25.0 | 25.3 | 2.3 | 2.8 | 3.5 | 4.2 |
| 32 | 32.0 | 32.3 | 2.9 | 3.6 | 4.4 | 5.4 |
| 40 | 40.0 | 40.4 | 3.7 | 4.5 | 5.5 | 6.7 |
| 50 | 50.0 | 50.5 | 4.6 | 5.6 | 6.9 | 8.3 |
| 63 | 63.0 | 63.6 | 5.8 | 7.1 | 8.6 | 10.5 |
| 75 | 75.0 | 75.7 | 6.8 | 7.4 | 10.3 | 12.5 |
| 90 | 90.0 | 90.9 | 8.2 | 10.1 | 12.3 | 15.0 |
| 110 | 110.0 | 111.0 | 10.0 | 12.3 | 15.1 | 18.3 |
Our company has formed a mature product system, plastic extrusion molding equipment: PVC, PP, PP-R, PE, HDPE, double pipe extrusion production line, profile, wood-plastic profile, frame foam, plate (sheet) Material, door panel extrusion production line, waste plastic recycling, cleaning granulation production line, auxiliary equipment: mixing unit, crusher, loading machine, dryer, mold temperature machine, chiller, color mixing machine, vibrating screen, printing machine, milling Machine, traction, cutting machine, etc.
Our company will continue to innovate, work diligently, provide more products to meet the special needs of customers, perfect and strive to be your business partner.
Contact Person: Mr. Batsita
Tel: 86-13913294389
Fax: 86-512-58968376
