|
Product Details:
Payment & Shipping Terms:
|
Material: | UPVC/CPVC/OPVC/PE/PP/MB/CORBON | Model: | Heating Mixer,heating Cooling Mixer, Cooling Mixer |
---|---|---|---|
Mixer Model: | SHR-100 | Heating Mixermotor Power: | 22Kw |
Inverter Brand: | ABB | Temperature Control Brand: | OMRON |
Capacity: | 200Kg/h | ||
Highlight: | industrial mixer machine,plastic mixture machine |
SHR-100L industrial mixer machine PVC/PE/PP plastic mixture machine
High-speed mixer application range:
The high-speed mixer is especially suitable for efficient and uniform mixing of solid-liquid, solid-powder, powder-powder and powder-liquid. Discharge valve: ball valve, butterfly valve, gate valve can be selected for high-speed mixer products are widely used in fine chemicals, feed, electronics, food, hard materials, ceramic materials, biology, medicine, non-metallic mining, building materials, coatings, Better mixing of dyes, fertilizers and metal powders. The shear-sensitive crystalline powder is mixed in batches and the liquid is mixed into the solid.
Main structure description:
The mixer is different from the pelletizer. It consists of seven parts: the frame, the transmission, the pot body, the lifting and lowering, the discharge port and the electric control box. The whole machine adopts a closed structure, which is reasonable and beautiful. The pot body is made of stainless steel, the inner surface is extremely smooth and hard, and it is wear-resistant, corrosion-resistant and difficult to stick. The mixer body has a heating sleeve and a resistance heating coil. The temperature is transmitted to the pot body through the high-flame point heat-conducting oil in the heating jacket, so that the pot body is evenly heated, and the temperature of the material in the pot can be controlled by adjusting the temperature. The outer layer of the jacket has asbestos insulation.
This series of high-mixer machine lids are cast from aluminum alloy. The inner surface is polished by the finishing car. After it is lifted from the cylinder, it can be rotated horizontally clockwise (rotated 70°C) in the vertical direction. The cover is filled with holes for adding resin, plasticizer and stabilizer, and venting holes. According to your own arrangements. Do not use too much force on the lid to prevent it from hitting the wall. In order to prevent the lid from being covered, the stirring slurry turns to cause personal accidents, and the motor protection is specially set.
The mixer deflector is used to enhance the mixing effect. The baffle has an approximately streamlined surface, and the baffle affects the circulating flow of the material. Its most advantageous position depends on the material to be mixed. The deflector can be freely adjusted in the pot body and can be adjusted vertically. The external clamping device fixes the baffle angle. The thermocouple is assembled in the deflector, and its connection is led out through the conduit to the terminal head, connected to the temperature meter of the electric control box, and the material temperature can be fed back to the indicator for automatic control of the discharge port. Unloading
Details specification pictures mixer:
Technical date:
Model | Capacity(L) |
Effective Capacity(L) |
Motor Power(KW) | Main shaft Speed(rpm) | Heating Method | Discharging Method |
SHR-5A | 5 | 3 | 1.1 | 1400 | Self-friction | Hand work |
SHR-10A | 10 | 7 | 3 | 2000 | ||
SHR-50A | 50 | 35 | 7/11 | 750/1500 | Electricy steam | Pneumatics |
SHR-100A | 100 | 75 | 14/22 | 650/1300 | ||
SHR-200A | 200 | 150 | 30/42 | 475/950 | ||
SHR-300A | 300 | 225 | 40/55 | 475/950 | ||
SHR-500A | 500 | 375 | 47/67 | 430/860 | ||
SHR-800A | 800 | 600 | 83/110 | 370/740 | ||
SHR-200C | 200 | 150 | 30/42 | 650/1300 | Self-friction | Pneumatics |
BEISU Machinery:
BEISU machinery and equipment recommendation: PVC/PE/PP pipe production line, PVC/PE wood plastic production line, PVC profile/profile production line, PVC/PP/PE/ABS sheet/sheet production line, PVC edge band production line and mill, High-speed mixer (group), crusher, sharpener, shredder, tractor, winder, cutting machine and other plastic auxiliary machinery.
Why choose BEISU Machinery:
A1:Plant construction, renovation plan, pipeline laying plan in the plant, construction plan of circulating cooling pool
A2:Supply of raw materials, transformers, air compressors and other procurement plans
A3:Provide relevant raw material specific formula, high quality raw material suppliers, raw material cost accounting
A4:Installation equipment, commissioning equipment, training staff, and provide technical support throughout the year
A5:BEISU company has a plastics industry engineering alliance nationwide, in the case of distance, can provide relevant talents in your company year-round work, as a technology backing
Contact Person: Mr. Batsita
Tel: 86-13913294389
Fax: 86-512-58968376