|
Product Details:
Payment & Shipping Terms:
|
Type: | Two Shaft Shredder | Name: | Plastic Shredder Machine For Sale |
---|---|---|---|
Use: | Food Bags | Warranty: | 12 Months |
Voltage: | 380V/50Hz/3Phase | Application: | Recycle Waste Plastic |
Blades Material: | SKD-11 | Usage: | Bags |
Highlight: | industrial shredder machine,industrial plastic shredder |
Hard knife double shaft shredder with PLC control for waste Cement bags
Operating procedures
1.1 should be familiar with the relevant provisions of the shredder user manual, familiar with the structure and performance of the shredder equipment and control system, working principle, so that it will be used, will be maintained, will rule out general defects. Can operate the device independently.
1.2 The rotating parts of the shredder must be equipped with protective measures. The production site should be equipped with protective measures for the fence to prevent the workers from causing damage near the rotating area of the cutter shaft.
1.3 Before the operation, you must wear a safety helmet, dustproof, and wear protective clothing such as overalls and work shoes.
1.4 All screw fasteners, running parts and couplings of the equipment should be carefully and thoroughly inspected; after the inspection and crushing system has the safe production conditions, the operator can start the machine according to the operating procedure.
1.5 The shredder must be started under no load. After the normal speed is reached, the material can be crushed and must be uniformly discharged. The foreign matter at the feed port should be closely watched, especially the stones and bricks beyond the broken range. Ceramics and metal parts (such as steel bars, iron blocks), etc., if any debris is found, stop the feeding immediately, stop the process in time and check out
1.6 For spring mattresses that are prone to tool wear and poor smoothness, the spring must be removed and broken.
1.7 If the shredder is found to be abnormal after the start-up (vibration, guidance, etc.), it should be stopped immediately. After the cause is found and the obstacle is removed, the brick breaking machine can be started again.
1.8 It is necessary to inspect and repair the shredder. It must wait for the rotating parts of the shredder to completely stop, and turn off the main power supply, and hang the “check-and-close” safety warning sign to confirm that the power is completely cut off, the maintenance personnel will be on site. The main power switch of the shredder control cabinet is cut off before entering the shredder area; at the same time, a special person must be arranged to perform safety monitoring at the shredder area.
1.9 During the operation of the shredder, it is strictly forbidden to make any adjustment, cleaning or overhaul work.
1.10 When performing adjustment, cleaning, overhaul, etc., the shredder must be powered off and locked, and hang the "someone's work, no power transmission" safety warning sign
1.11 The shredder lubrication part, rotate the oil cup regularly before starting the machine; must regularly carry out refueling, refueling quantity and oil quality must meet the requirements of the instruction manual
1.12 shredder and motor must be firm and reliable, and the motor connection cable is not damaged. Every shift and shift should be carefully checked, and problems should be dealt with in time.
1.13 During the occurrence and handling of accidents, the operator should strictly observe the position and must not leave without any reason.
Details specification pictures:
Main technical parameter:
Model | VD-3060 | VD-3080 | VD-30100 | VD-30120 | VD-35120 | VD-4380 | VD-43120 | VD-43150 |
Capacity(kg/hr) | 300 | 500 | 800 | 1000 | 1200 | 500-800 | 1500-2000 | 2500 |
Shredding chamber(mm) | 600x575 | 800x600 | 1000x600 | 1200x600 | 1200x650 | 1200x770 | 1200x770 | 1500x770 |
blades diameter(mm) | 300 | 300 | 300 | 300 | 350 | 430 | 430 | 430 |
Shafts number | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Speed (RPM) | 18 | 18 | 18 | 18 | 18 | 19 | 19 | 19 |
Motor power (KW) | 7.5+7.5 | 15+15 | 18.5+18.5 | 22+22 | 22+22 | 15+15 | 30+30 | 45+45 |
Blade material | SKD-11 | SKD-11 | SKD-11 | SKD-11 | SKD-11 | SKD-11 | SKD-11 | SKD-11 |
Zhangjiagang Beisu Machinery has a professional and dedicated after-sales service team to provide customers with a full range of responsible and reliable service. Our customer service work is divided into three phases: pre-sales program discussion and design, production tracking and installation and commissioning, and after-sales service and maintenance.
Pre-sales program discussion and design:
According to the customer's actual crushing or processing line requirements, provide customers with the corresponding professional knowledge explanation; at the same time, our engineering team selects the equipment model for you, customizes the most reasonable and effective crushing scheme, and ensures the perfect combination of our equipment and site layout. Create the greatest value and leave you carefree.
We provide customers with the design of the production line process, and truly design a satisfactory and reasonable production line for customers. Often, in order to meet the special needs of our customers and achieve the best results, we will make non-standard design changes to our products and treat every customer with care.
Contact Person: Mr. Batsita
Tel: 86-13913294389
Fax: 86-512-58968376