PE 7.5kw 5000kg/H Plastic Mixer Machine With Heating Device

The core patents of vertical drying mixer:

A1: The hot air of the traditional dryer enters from the lower side of the barrel. Because the material is static, the hot air is more difficult to penetrate, which makes the inside of the dryer heat up and down, and sometimes the material is overheated. Blocks, causing blockage, making it more difficult for hot air to enter other areas, so the originally expected drying effect cannot be achieved. The design of this machine is a two-stage screw conveyor. The first stage feeds the raw materials into the barrel, and the second stage continuously lifts the raw materials to the upper part of the barrel and throws them in an umbrella shape, while the hot air blows out from the center of the lower part of the barrel. , Smoothly penetrate upwards from the gap of the moving raw materials, the raw materials are fully heated under dynamic conditions; A2: The dryer barrel is designed as a double-layer barrel design, with special insulation materials in the middle, which achieves the effect of heat preservation and energy saving; the inner layer is made of stainless steel for the material contact part; the middle sandwich is installed and special insulation materials, so It can achieve the effect of safety and energy saving; A3: Special high-frequency heater, fast heating, low power consumption, and the comprehensive cost of drying per ton is 25-30 yuan/ton; A4: The special double-pipe moisture exhaust port can effectively discharge moisture, collect dust, and never pollute the working environment; A5: This model has the characteristics of more work: because the materials are constantly tumbling up and down in the barrel, the hot air is not lifted from the center for transportation, so as to achieve the effect of mixing and drying. If drying is not required, this series of machines The type can be set as a separate mixing work mode; A6: Two-in-one drying and mixing function. When drying is not required, just turn off the "heating switch" and "fan switch", and this series of models can be used for plastic mixing and homogenization purposes, one machine for two purposes;