PLC Control PPR Pipe Production Line 16mm - 63mm Pipe Range For Hot Water

PLC control 16mm~63mm high strength PPR pipe production line for hot water

PPR series product performance:

Density: 0.9g/cm3

Elastic modulus: 20 ° CMPa 800

Thermal expansion coefficient: 1/K 1.5*10-4

Heating coefficient: W/m°C 0.21

Longitudinal retraction rate: % ≤ 2

Simple beam impact test: % breakage rate ≤ 10

Solvent flow rate: [230 ° C / 2.16 kg ] rate of change ≤ 30% of raw materials

Hydrostatic pressure: 20 ° C, 1 h / 95 ° C, 22 h / 95 ° C, 1000 h no damage, no leakage

Summary of PPR Pipe diameter for 16~63mm:

A1:Maximum Capacity: it can reach 2.5~3 ton per 24 hours depend on formula

A2:Water supply:≤25℃,≥0.3Mpa

A3:Air supply:0.3m³/min,>0.5 Mpa

A4:Temperature:0-40℃

A5:Humidity:95% no condensation

A6:Installation power:123kw

A7:Tatal Length:35 meters

Low-voltage electrical appliances:
A1:Button, toggle switch: France Schneider products
A2:Contactor: French Schneider products
A3:Temperature control table: Japan OMRON
A4:Heating coil: stainless steel ceramic heater

Production line conditions:
A1:Location: Factory interior
A2:Power: Safety zone with warning sign
A3:Temperature: 0-40 ° C
A4:Humidity: 85% without condensation

Layout:

Raw material+additive→Mixer→Auto Feeder→Hopper dryer→Single screw Extruder→-Moulds→Vacuum calibration tank→Spray Cooling Tank→Haul-off Unit→Cutting Unit→Stacker

Details specification pictures of PPR pipe production line by BEISU Machinery:

Main technical parameter:

Zhangjiagang Beisu Machinery has a professional and dedicated after-sales service team to provide customers with a full range of responsible and reliable service. Our customer service work is divided into three phases: pre-sales program discussion and design, production tracking and installation and commissioning, and after-sales service and maintenance.

Pre-sales program discussion and design:

According to the customer's actual crushing or processing line requirements, provide customers with the corresponding professional knowledge explanation; at the same time, our engineering team selects the equipment model for you, customizes the most reasonable and effective crushing scheme, and ensures the perfect combination of our equipment and site layout. Create the greatest value and leave you carefree.

We provide customers with the design of the production line process, and truly design a satisfactory and reasonable production line for customers. Often, in order to meet the special needs of our customers and achieve the best results, we will make non-standard design changes to our products and treat every customer with care.